Our X-Series devices allow the installation of suppressors directly to the muzzle devices with the use of external threads. This is a licensed product through Dead Air Silencers. Facemount devices are available in both KeyMount and X-Series configuration. JMac Customs LLC is not liable for injury, damage, or death related to the usage of this product. KeyMo & KeyMicro Suppressor compatible 10mm Bore 2.
#JMAC KEYMO PROFESSIONAL#
Contact us if you have any questions or need a recommendation for professional installation.
Alignment rod was close to the endcap, definitely not centered, but decided to send it bc Deadair warranty.
All suppressor mounts MUST be tight against the shoulder or face of the barrel, using shims or face-milling method. If it makes you feel any better, I took my m70 to the range today with my sandman s on it for the first time. PSA JAKL 5.56 NATO Classic EPT Complete Rifle Lower With JMAC Skeleton Stock. Serious damage could result to your suppressor/firearm and physical harm is possible if installed/used incorrectly. pinned JMAC KeyMo compatible flash hider (non NFA), monolithic uppe. JMac Customs recommends that all suppressor mounts be installed and checked for alignment by a certified professional. We recommend this be professionally installed and checked to ensure alignment.*** ***JMac Customs is NOT responsible for improper installation of this muzzle device or any damage to the suppressor using this device. If you're not familiar with Facemount devices, click HERE to learn more! You must use our face shims (optional) or your barrel MUST be faced to properly time this muzzle device.
JMAC RRD-2C 30S KeyMicro Brake 5/8X24(For Dead Air Keymo/Keymicro) 90.00. We make it easy to buy suppressors online. This device is designed to be tightened against the face of the barrel. Shop JMAC Customs LLC Suppressor and Accessories with us. Barrel must extend at least 1.32” from the gas block. *This WILL NOT work on a standard AKM, pistol, or SBR.
#JMAC KEYMO FULL#
*When testing these devices, we found that high rates of fire such as full auto or “mag dumps” could cause damage to the device due to the excess heat, pressure, and gasses from unburnt powder on shorter barrels. *Not intended or recommend for barrels shorter than 10.5” (see below).This RRD-4C is designed to be permanently attached to a 14.5 inch barrel and allows you to attach KeyMount compatible devices and suppressors! We recommend this muzzle device be professionally installed on our 14.5" barrel by one of our Kalashnismiths to ensure alignment. These Brakes are also better quality than the Dead Air version. The best of both worlds! Our super effective RRD-4C muzzle brake with KEYMO suppressor mount! Note: These Micro Brakes are 100 compatible with Dead Air Keymo and KeyMicro Adaptors. If it makes you feel any better, I took my m70 to the range today with my sandman s on it for the first time.
#JMAC KEYMO INSTALL#
For a full list of compatible suppressors please see our KeyMount Devices & Compatibility Chart HERE.(R)ecoil(R)eduction(D)evice(4) ports(C)ompensator(14)mmLH threads(F)ace(KM) KeyMount It will either be fine or a really expensive mistake. Designed specifically for our X-Series brake mount, this adapter allows you to install pretty much any Omega/Bravo adapter and muzzle devices including KeyMo, ASR, YHM, Plan B etc Wolverine Standard Length with 14mm adapter: 7.44 Wolverine with our adapter and 14mm X37 brake: 7.28 -17.4ph Stainless -Fits most Bravo/Omega 1.375-24 adapters. In addition to the BDS-37, the DA428 is compatible with several many popular suppressors utilizing the 1.375x24 (Omega) thread pattern. The JMac Customs 2C H&K 15x1 Muzzle Brake with Keymount - KeyMo or KeyMokeyMicro is a tough muzzle device made by those who know that muzzle devices are the unsung heroes of increased accuracy and decreased recoil. The DA428 KeyMo Adapter (Omega) from Dead Air Silencers will allow you to attach our BDS-37 Blast Diversion Shield or Extended Blast Shield to any of our KeyMicro muzzle devices. PSA 'Sabre' Forged 14.5' 5.56 FN CHF CL 13' Sabre Lock up Rail Pin/Weld with JMAC Keymo Mount. If you plan on using with the following muzzle devices you will need the adapters
#JMAC KEYMO SERIES#
In addition to the 24F/26F-KM the BDS is also compatible with our X37 series devices an works with a wide range of suppressor adapters/mounts, see below.īlast shield does NOT include any mounts, please select from pull down menu! This blast shield threads over 1.375-24 threads and diverts the blast forward, reducing side blast/concussion. Our BDS-37-EXT was co-developed with our R RD-360-24F-KM & RRD-369-26F-KM series of muzzle devices with external threads. pistol suppressors) and the micro muzzle devices are meant to fit in either, while the longer existing ones may not fit in smaller pistol blast chambers like the Ghost handgun suppressor. (B)last (D)iversion (S)hield - (37) 1.375-24 threads - (EXT)ended The KeyMo and KeyMicro are adapters that are differentiated by the thread socket (rifle vs.
0 kommentar(er)
